Seer S2108 and S2102 Carbon Fiber Helmets

The Seer S2108 and S2102 models are made from lightweight carbon fiber. If the Seer S2102 and S2108 models are made from carbon fiber, what is the Seer S1608 and S1602 made from? You can find information about the Seer S1608 and S1602 fiberglass models by clicking this link.

One of the most common questions that we receive is "What is the difference between the Seer S2108 and the Seer S2102? First, both helmets are made from the same carbon fiber outer shell, inner liner, and interior. Information on the materials used to make a Seer Helmet can be found on our website. The difference between the two helmet models are: 1) visor, 2) harness, and the paint trim lines (if applicable).

SEER S2108

1. Visor: The visor on the S2108 is a black patent leather visor. The visor is non-removable and is attached to the helmet with 2 decorative screw buttons and one center screw. The visor is available with Gold, Silver or without a rank band. The visor is available with "P" or "S" decorative buttons.

2. Harness: The helmet harness on the S2108 is a closed ear harness. The closed ear harness has 6 perforated holes for hearing attenuation.

SEER S2102

1. Visor: The visor on the S2102 is a black plastic snap-on visor. The visor snaps onto the helmet with three snaps. The plastic visor is available in Solid or Transparent/Smoke. The visor is available with Gold, Silver or without a rank band.

2. Harness: The helmet harness on the S2102 is an open ear harness. 

If you build your helmet with Two Colors, there is another difference between the S2108 and the S2102.

Seer S2108   

The paint trim lines on the S2108 is a "straight-line trim". The horizontal trim line is parallel to the ground on the sides and rear of the helmet.  

Seer S2102   

The paint trim lines on the S2102 is a "curved trim". The horizontal trim line follows the curvature of the helmet around the sides and rear of the helmet.  

At Super Seer we manufacture each helmet by hand at the time of ordering. This allows the user to customize the Seer Helmet in many ways. For example, you can build your Seer Helmet with the S2102 visor, the S2108 paint trim, and the S2102 harness. 


Features and details on the Seer S2108 and the Seer S2102 can be found on our website. Here you can build your own Seer S2108 and Seer S2102 using our online webstore. As you enjoy your Seer Helmet for years to come, you may need replacement parts. We have over 40 replacement parts for your Seer Helmet on our website. At Super Seer we manufacture all of our helmets at our factory in Colorado using USA sourced raw materials. Please contact us if you have any questions or if you need help building your own Seer Helmet.